Many times, there's no need to clean newly purchased glass or ceramic beads. This is because when they're new, they're only contaminated with carbon black, which is inert and won't affect your experimental results. Furthermore, carbon black is quickly removed by centrifugation or filtration after crushing. Remember, never use acid to clean beads. Instead, soak used beads in laboratory detergent overnight, rinse with tap water to remove all detergent, and then rinse with distilled water. Place the washed beads on a stainless steel or glass tray and dry them in an oven at 40-70°C.
Purchasing Guide:
1. For bacteria, we recommend using glass beads with a diameter of 0.1 mm.
2. For yeast/fungi, use glass beads with a diameter of 0.5 mm.
3. For tissue blocks, use beads with a diameter of 1.0 mm.
4. For skin and plant tissue, use beads with a diameter of 2.5 mm.
5. In practice, researchers often choose beads that are close in size to the sample particles and have a higher density. For example, 0.1mm zirconia-silica beads are often used to disrupt spores; 2.5mm zirconia or stainless steel beads are often used to disrupt plant fibrous tissue.
6. Our preliminary research indicates that using angular beads rather than round beads is more time-efficient for disrupting plant and animal tissues.